|
Being a dedicated 110v only machine, the Fusion 151MA runs much more efficiently
than dual voltage 110v/240v machines so is able to provide a market beating
100% duty cycle at 150 Amps full power!
Software driven digitally controlled Arc Force, Hot Start & Anti-Stick
features ensure perfect ignition even with the most difficult of electrodes,
including Celulosic.
A digital meter clearly shows the selected amperage which can be accurately
set, even wearing heavy welding gloves, using the large 360o encoder controls.
Also suitable for scratch-start TIG welding (with optional TIG kit), an LED
panel display allows quick and easy selection between processes and clearly
shows which mode the machine is set to, as well as mains power indicator and
over temperature light.
Housed in an IP23 high impact nylon casing incorporating a forced-fan ‘wind
tunnel’ design; this ensures highly efficient cooling but prevents dust
& dirt drawn into the machine by the fan contaminating internal electronics.
Supplied with:
|
Weldequip Package includes as standard:-
- 3 metre work lead assembly fitted with premium quality ESAB electrode
holder and 35-50mm dinse plug
- 3 metre earth lead assembly with HD 400 amp earth clamp & fitted
35-50mm dinse plug
- Tough polypropylene site case
- Factory fitted 32 Amp 110v Plug.
|
 |
Technical Specifications
- Supply Voltage: 110v
- Power Transformer Rating: 5 kVA
- Recommended Generator Rating: 7 kVA
- MMA Power Output: 20 – 150 Amps
- TIG Power Output: 10 – 150 Amps
- MMA Duty Cycle @ 100%: 150 Amps
- TIG Duty Cycle @ 100%: 150 Amps
- Max Open Circuit Volts: 92v
- Dimensions: 365mm L x 360mm H x 220mm W
- Weight: 8kg
- Enclosure Class: IP23
- Standards: IEC 60974 CE
- Warranty: 24 Months Parts & Labour
 110 Volt
welding machines must be operated from power transformers with a minimum of
a 5 kVA rating. Standard tool transformers, typically 3 – 3.5 kVA, are
not up to the job and will not provide sufficient power to run a welding machine.
| 
